進行工藝試驗與分析，確保產品品質的前提下，縮短工藝過程時間和減少洗滌液消耗，提升產能和降低運行成本。
Centrifuge process optimization and cost control
During debugging, process test and analysis are carried out to ensure the quality of the product, shorten the process time and reduce the consumption of washing liquid, so that increase the production capacity and reduce the operating cost.
u 進料速度、流量設定，料層厚度設定，每次濾餅產量保持一致
u 脫液轉速、時間設定
u 洗滌轉速、時間、流量設定，洗滌效果保持一致
u 離心轉速、時間設定，濾餅含濕率保持一致
u 殘余濾餅厚度一致，清除效果一致
u 清洗工藝一致，濾布再生效果一致
每次濾餅厚度與重量保持一致，洗滌工藝參數(shù)一致，以及其它工藝參數(shù)一致，確保產品品質的一致性和運行成本的可控
u Feed speed, flow rate setting, Iayer thickness setting, eaeh solid cake yield keeping the same speed.
u Speed and time setting of dewatering.
u Washing speed, time, flow setting, washing effeet is consistent
u Centrifugal speed, time setting, filter cake moisture content is consistent
u The thickness of residual filter cake is the same, and the removal effect is consistent.
u The cleaning process is uniform, and the regeneration effect of filter cloth is the same.
The thickness&weight of each filter cake is consistent. the parameters of washing process are consistent. and the process parameters are consistent with other process parameters to ensure the consisteney of product quality and the operation cost of the controllable.